Particularly applicable to the area which has a high demanding for light-weight material, such as automatic rail transit, shipping, fan blade and so on.
The productions produced by the technology are lighter,greener,cheaper and safer than traditionally manufactured equivalents,yet with the same performance as solid product!
1.Lighter:Products manufactured using foaming blow molding typical need 15-20% less polymers than those using traditional extrusion technologies.
Thanks to the enhanced this technology,customers are able to use fewer polymers and reduce the weight of vehicle,thus achieving better performance as improving the dynamic,fuel economy and emission than the original technology.
2.Greener:Foaming blow molding has many positive environmental benefits over traditional techniques,As noting but atmospheric gases are added to the foamed polymer,harmful emissions are avoided,recycling these pure materials is easy and cost effective.As the technology reduces plastics used at the source,its widespread adoption could significantly reduce the volume of oil derived plastics used.
In addition to reduced plastic consumption and the point of manufacture,it delivers reduced fossil fuel usage as a result of the weight reduction derived from micro foaming of the finished parts.
3.Increase productivity:With special screwed,the pressure in screw not only increases extrusion speed,but also makes the extruded material more stable and even.In addition,extruded material more stable and even.In addition,extruded material by foaming blow molding has low density,It is much easier to blow, form and cool down that shorten he producing cycle,enhancing the production efficiency.
4.Lower Cost:The substantial material weight-saving achieved by the use of foaming blow molding enables customers to make significant cost savings on each part produced.This result in a product margin opttimization and increased profit for businesses.
In many cases,the savings made thanks to our technology enable customers to be competitive on the market while enhancing their profit.
5.Safer:As for auto pars,common PE material is harder.There is the strong possibility that when traffic accident occurs,PE material is likely to collide and break off,producing sharp angels which may harm to people's health.The foaming plastic has unparalleled density and higher impact strength.
|最大制品容積 Max.conttainer caoacity||L||160|
|模頭數 Number of die||set||1|
|機器外形尺寸 Machine dimension||M||7.8*4.8*5.2|
|機器重量 Total weight||Ton||40|
|模頭 Accumulator head|
|模頭儲料容積 Accumulator capacity||L||16|
|最大射料速度 Max.injection speed||Kg/sec.||1.5|
|擠出壓力 Injection pressure||Mpa||20|
|模頭加熱段數 Number of die heating||zone||5|
|模頭加熱功率 Power of die heating||KW||47|
|擠出口最大直徑 Max.die-pin diameter||mm||450|
|開合模系統 Clamping unit|
|鎖模力 Clamping force||KN||800|
|模板間距 Platen opening stroke||mm||650-1500|
|模板尺寸 Platen size||mm||1700*1000|
|最大模具尺寸 Max mould size||mm||1400*900|
|模具厚度 Mould thlckness||mm||510-650|
|擠出系統 Extruder unit|
|螺桿直徑 Screw dlameter||mm||100|
螺桿長徑比Screw L/D ratio
|擠出量 Extruding volume||Kg/hr||160-240|
螺桿轉速 Screw rotation rate
|螺桿加熱功率 Extruder heating power||KW||53|
|擠出電機功率 Extruder driving power||KW||75|
|動力 Power consumption|
|油泵電機功率 Oil pump driving power||KW||22|
|伺服點擊功率 Servo drive power||KW||4|
|最大總功率 General assembly||KW||220|
|氣源壓力 Air pressure||Mpa||0.7|
|氣源排量 Air consumption||M3/min||0.8|
|平均能耗 Average energy consumption||KW||84|
|冷卻水用量 Cooling water consumpttion||m3/min||0.6-1|
Tincoo(Changxing) Packaging Technology Co.,Ltd..
TINCOO MACHINERY is a professional supplier devoted to the designing & production of big-scaled and multi-layer extrusion molding machine. The company is located on the south shore of Taihu Lake--Huzhou, with total investment of 10 million dollars, covering a total area of 58,000 square meters. Machines from the company are mainly for export, and have been exported to more than 80 countries in Asia, Mid-East, Europe, Africa, Australia, and Latin-America. The marketing network has covered all over the world.
There are 2 general departments in our company: machinery department & mold department. Machinery department focuses on designing and developing various plastic extrusion blows molding machine by learning foreign advanced techniques& administration faith; mold department focuses on mould design and manufacturing of preform mold& extrusion mold&blow mold. According to different character of different plastic material, we have successfully designed different machines, which are suitable for different products: container of PE, PVC, PP, PC, PETG, PS, PAN, PA, PPE, PPO, ABS, POM, TRA, etc(like big tank, collapsible container car plastic hollow part, office equipment,sport facility, toys, mechanical container,5 gallon PC container,tool box, etc). We have an experienced team will design, produce and offer service after service with great team spirit.High quality but reasonable price has been widely approved by our customers from local and abroad.
2, Well-trained & experienced staff are to answer all your inquiries in English and Chinese.
3, Working time: 8:00am ~5:00pm, Monday to Saturday.
4, Your business relationship with us will be confidential to any third party.
5, Good after-sales service offered, please get back to us if you got any questions.
We?will?do?our?best?to?teaching?you?how?to?use?the?machine.welcome to visit our factory!?